Watlow Electric 989 Weather Radio User Manual


 
WATLOW Series 988 User’s Manual 5.7
Operation Menus, Chapter 5
Operation-System
Alarm 4 High
Select the high trigger value for the output 4 alarm.
[A4HI] This prompt appears only if [`AL4] (Output Menu) is set to some-
thing other than [``no].
If Default
↓↓
highest
[`Pr1] or [`pr2] [A4LO] value of value of
[`AL4] [`AL4] [A4HI] [`rH1] (or [`rH2]) sensor
(Output Menu) (Input Menu) range
[`dE1] or [`dE2] or [rAtE] [```0] [`999] [9999]
[`AL4] [`AL4] [`AL4] [A4HI] [A4HI] [A4HI]
(Output Menu)
Auto-tune
Initiate an auto-tune.
[Pidb] appears only on controllers with enhanced software (98_B-_ _ _ _-_
_ _) and with [ALgO] (Global Menu) set to [Pid2] or [cscd].
[`AUt] This prompt always appears.
Default
[`OFF] [PidA] [Pidb]
[`AUt] [`AUt] [`AUt]
[A4HI]
[`AUt]
NOTE:
For more informa-
tion on auto-tune
see Chapter 7.
C5.wc 5/14/1999 8:51 AM Page 5.7