Filter
Top Products
Maintenance Instructions LUBRICATION
34
Ident Lubrication No.
No. Location Type Places
Ident Lubrication No.
No. Location Type Places
1 Deck Caster Wheel Fork Pivot Grease 2
2 Deck Caster Wheel Bearing Grease 2
3 Tee Gearbox, Deck Oil
* 1
4 Blade Drive Gearbox Oil
* 2
5 PTO Shaft Guard Hinge Oil 1
6 Universal Joint Shaft & Grease
** 1
Tube Assembly
7 Pivot Assembly, Tilt-Up Deck Grease 4
8 Deck Support Arm Socket Grease 2
9 Universal Joint Quick Connect Grease 1
Spline (Grease Slide Area)
10 Tilt-Up Roller Wheel Oil 2
11 Ground Drive Belt Idler Arm Grease 1
(not visible - access side of body)
12 Throttle/Choke Control Pivot Oil 1
(on Control Panel) & Cable End
13 PTO Clutch Lever Pivot Grease 3
14 Parking Brake Pivot Oil 1
15 Engine Oil Oil
*** 1
16 Steering Control Linkage Grease 2
17 Tail Wheel Fork Pivot & Grease 2
Wheel Bearing (not shown)
18 Clutch Actuator Push Rod Grease 1
19 Deck Support Pivot Arm Grease 2
* Gearboxes are permanently lubricated and
sealed requiring no scheduled lubrication.
Oil level should be checked only when an oil
leak is noted. Refer to Mower Deck Gear-
box Lubrication in this section.
** Lubricate every eight (8) hours.
*** Refer to Engine Oil in this section.
NOTE: DSD42 Deck is shown for reference. For oth-
er Deck Lubrication Points, Refer to Deck and
Carrier Frame Illustrated Parts Manual.