Filter
Top Products
Specifications
4
MODEL
MT 20.0 HP MT 25.0 HP
TRANSMISSION (continued)
Service Brake Dynamic Braking through
Hydrostatic Transmission
Dynamic Braking through
Hydrostatic Transmission
Parking Brake Mechanical Pin Lock in
Transmission Gear
Mechanical Pin Lock in
Transmission Gear
Neutral Transmission Release by
Manual Dump Valve
Transmission Release by
Manual Dump Valve
Final Drive Gear Drive Axle Gear Drive Axle
Transmission Fluid
Factory Service SAE 30W Straight Viscosity
Motor Oil (Mobil DTE 18M
Hydraulic Oil Installed at
Factory)
SAE 30W Straight Viscosity
Motor Oil (Mobil DTE 18M
Hydraulic Oil Installed at
Factory)
Alternate Transmission Fluid Mobil 1 Synthetic Motor Oil
(5W30)
Mobil 1 Synthetic Motor Oil
(5W30)
Transmission Fluid Capacity 1 qt (1 liter) 1 qt (1 liter)
Transmission Cooling Cooling Fan Mounted on
Drive Pulley
Cooling Fan Mounted on
Drive Pulley
Ground Travel Speed
Forward m.p.h. (km/h)
Reverse m.p.h. (km/h)
0-5 (0-8) Infinitely Variable
0-5 (0-8) Infinitely Variable
0-5 (0-8) Infinitely Variable
0-5 (0-8) Infinitely Variable
BLADE DRIVE
PTO Shaft Quick Disconnect Rectangular
Shaft with Two High-Speed
U-Joints
Quick Disconnect Rectangular
Shaft with Two High-Speed
U-Joints
Blade Spindle Each Blade (2) Mounts Direct
on Peerless Right Angle
Gearbox with Tee Gearbox
in Center Connected to PTO
Shaft (Complete Geared
Drive, Peerless Model 1000
Gearboxes)
Each Blade (2) Mounts Direct
on Peerless Right Angle
Gearbox with Tee Gearbox
in Center Connected to PTO
Shaft (Complete Geared
Drive, Peerless Model 1000
Gearboxes)
Blade Drive Clutch and Brake Manual Belt Tightener Clutch
and Band Brake (Stops
Blades within Five (5)
Seconds of Disengagement)
Manual Belt Tightener Clutch
and Band Brake (Stops
Blades within Five (5)
Seconds of Disengagement)
Max. Blade Speed
[25 in. (64 cm) Blade]
@ 3600 RPM Engine
2400 RPM
[15700 FPM (4785 m/min)]
2400 RPM
[15700 FPM (4785 m/min)]
TIRE SIZE
Deck Caster Wheel 2.80/2.50-4 Pneumatic (4-Ply) 2.80/2.50-4 Pneumatic (4-Ply)
Deck Caster Wheel (Optional) 8.25 x 2.75 Semi-Pneumatic 8.25 x 2.75 Semi-Pneumatic
Drive 18 x 9.50-8 (4-Ply) 18 x 9.50-8 (4-Ply)
Rear (Dual) 13 x 5.00-6 (4-Ply) 13 x 5.00-6 (4-Ply)