Filter
Top Products
ENGINE
AND
SNOWTHROWER
MAINTENANCE
MAINTENANCE
Before After Every 25 Every 50
At
the
SCHEDULE
each each hours of hours of end of the
use use
operation
operation
season
Check engine oil level.
1/
Check all fasteners
1/
for tightness.
Check operation of Auger
Drive Lever and
1/
Wheel Drive
Lever.
Apply oil to handlebar
control levers and
1/
linkages.
Clean all snow, slush, and
1/
ice off snowthrower.
Change engine oil.
1/
1/
Check tire pressure.
1/
Check auger gear box oil
level. Add SAE 90 gear oil
1/
as required.
Check and clean engine
cowling air screen on
1/
engine.
Check both belts for
wear.
1/
Check, clean, and re-gap
(or simply replace)
1/
spark plug.
Apply a light coating of
multipurpose grease to
1/
axle shaft bearing.
Apply a light coating of oil
1/
to drive chain.
Check belts for wear and
1/
damage.
Check wheel drive belt
and auger drive belt for
1/
adjustment.
Sand and re-paint any
1/
rusted areas.
24