Filter
Top Products
42
PARTS LIST Models 12211 and 12212
1 1100043 Hex Hd. Screw, 3/8-16 x 1-1/4*.......... 16
2 1270-2A Bolo Tine-single. Right hand tine
used on left side of tiller. (Incl.
two ea. Refs. 1 and 3)..................... 8
3 1733398 Hex Locknut, 3/8-16 ........................... 18
5 1982612 Hex Hd. Screw, 3/8-16 x 2, Grade 8.... 2
7 1270-1A Bolo Tine-single. Left hand tine
used on right side of tiller. (Incl.
two ea. Refs. 1 and 3)..................... 8
8 1902154010 Tine Holder. For left and right sides.... 2
-- 1901118 Bolo Tine Replacement Set (Incl. eight
ea. right hand and left hand tines,
and sixteen ea. Refs. 1 and 3)......... 1
-- 2475-1 Custom Tilling Bolo Tine, Left hand
tine (see Note 1 above) ................... 8
-- 2475-2 Custom Tilling Bolo Tine, Right hand
tine (see Note 1 above) ................... 8
-- 10802 Custom Tilling Bolo Tine Replacement
Set (Incl. eight ea. right hand and
left hand custom tines, and sixteen
each of Refs. 1 and 3)..................... 1
9 2706-01 Wheel and Tire Assy., left side,
4.10 x 6 tire on 6” wheel (A)(B) ...... 1
10 2706-02 Wheel & Tire Assy., right side,
4.10 x 6 tire on 6” wheel (A)(B) ...... 1
11 9380 Clevis Pin, .312 x 1-3/4 ...................... 2
12 9338 Hitch Pin ............................................. 2
13 1917487 Wheel and Tire Assembly (C)(D)......... 2
REF. PART
No. No. DESCRIPTION QTY.
REF. PART
No. No. DESCRIPTION QTY.
IMPORTANT: Left and right sides of
tiller are determined by standing in
operator position and facing direc-
tion of forward travel.
* Specify GRADE 5 if ordering part locally.
BOLO TINES, WHEELS
NOTE 1: Custom Tilling Tines are
available for your tiller. These are
special hard-faced tines that are
thicker than standard tines.
(A) For Model 12211 – S/N 122111100101-122111199999
(B) For Model 12212 – S/N 122121100101-122121199999
(C) For Model 12211 – S/N 122111200101-122111299999
(D) For Model 12212 – S/N 122121200101-122121299999
10
13
9
13