Filter
Top Products
Workman e2050/e2065 Page 5 – 3 Chassis (Rev. B)
Troubleshooting
Suspension and Steering
Problem Possible Cause
Front end is noisy. Front wheel lug nuts are loose.
Front wheel bearings are loose or worn.
Front end components are loose or worn.
Steering gear is loose.
Rear end is noisy. Rear wheel lug nuts are loose.
Transaxle problem (see Chapter 4 – Transaxle and Brakes).
Excessive steering play. Front wheel lug nuts are loose.
Front wheel bearings are loose or worn.
Steering linkage is loose or worn.
Tie rod ends are loose or worn.
Steering gear is incorrectly adjusted.
Front end shimmies. Front wheel lug nuts are loose.
Front wheel bearings are loose or worn.
Front wheel alignment (toe–in) is incorrect.
Steering linkage is loose or worn.
Tie rod ends are loose or worn.
Rubber insert in A–arm is worn.
Vehicle is unstable or wanders. Tire pressure is low or uneven between tires.
Wheel lug nuts are loose.
Front wheel bearings are loose.
Front wheel alignment (toe–in) is incorrect.
Steering column bushings are worn.
Rubber insert in A–arm is worn.
Steering gear is incorrectly adjusted.
Chassis