Snapper 1694151 Tiller User Manual


 
7
Safery
CHILDREN
Tragic accidents can occur if the operator is not alert to
the presence of children. Children are often attracted to
the unit and the operating activity. Never assume that
children will remain where you last saw them.
1. Keep children out of the area and under the
watchful care of another responsible adult.
2. Be alert and turn unit off if children enter the area.
3. Never allow children to operate the unit.
4. Use extra care when approaching blind corners,
shrubs, trees, or other objects that may obscure
vision.
SERVICE, MAINTENANCE, AND STORAGE
1. Check shear bolts and other bolts at frequent
intervals for proper tightness to be sure the
equipment is in safe working condition.
2. Always refer to the operator’s manual for important
details if the tiller is to be stored for an extended
period.
4. Maintain or replace safety and instruction labels as
necessary.
5. Maintain or replace safety and instruction labels as
necessary.
6. Keep nuts and bolts tight and keep equipment in
good condition.
7. Never tamper with safety devices. Check their
proper operation regularly and make necessary
repairs if they are not functioning properly.
Safety Rules and Information
8. Components are subject to wear, damage, and
deterioration. Frequently check components and
replace with manufacturer’s recommended parts,
when necessary.
9. Check control operation frequently. Adjust and
service as required.
10.Use only factory authorized replacement parts
when making repairs.
11.Always comply with factory specifications on all
settings and adjustments.
12.Only authorized service locations should be
utilized for major service and repair requirements.
13.Never attempt to make major repairs on this unit
unless you have been properly trained. Improper
service procedures can result in hazardous
operation, equipment damage and voiding of
manufacturer’s warranty.
14.Check shear bolts and other bolts at frequent
intervals for proper tightness to be sure the
equipment is in safe working condition.