Filter
Top Products
17
ADDITIONAL PROBLEMS
Symptom
Possible Cause
Remedy
Troubleshooting Guide
Engine idle too high.
Broken clutch spring or worn clutch
spring boss.
Warped or damaged attachment.
Loose gearcase.
Cutting attachment
moves at engine idle.
Excessive vibration.
Cutting attachment will not
move.
Adjust idle. Check Speci cations page for correct idle
speed.
Replace spring/shoes as required, check idle speed.
Inspect and replace attachment as
required.
Tighten gearcase securely.
Bent main shaft/worn or damaged bushings.
Shaft not installed in powerhead or gearcase.
Broken shaft.
Damaged gearcase.
Inspect and replace as necessary.
Inspect and reinstall as required.
Consult with an authorized Shindaiwa servicing
dealer.