Shindaiwa 62888-94013 Pole Saw User Manual


 
Dry Weight ............................................................. 6.1 kg/13.4 lb.
Length w/10" bar assembly ........................... 2804 mm/110.4 in.
Engine Type...................................................... 2-cycle, air-cooled,
vertical-cylinder
Bore x Stroke ...........................................32 x 28 mm/1.3 x 1.1 in.
Displacement ......................................................22.5 cc/1.4 cu. in.
Maximum Output ..................................................... 0.8kW/1.1 hp
@ 7500 min
-1
(rpm)
Fuel/oil ratio ..............................................................................50:1
Fuel Tank Capacity ................................................670 ml/22.7 oz.
Carburetor Type ..................................................Walbro WYL-122
Ignition .........................................................One-piece, electronic,
transistor-controlled
Spark Plug ................................................................. NGK BMR6A
Air Filter .....................................................Non-reversible flocked
filter element
Muffler Type ..........................................................2-Stage Catalyst
Starting Method .................................................................... Recoil
Cooling System............................................................... Forced air
Stopping Method ......................................................... Slide switch
Transmission Type ....................................................... Automatic,
centrifugal clutch with bevel gear
Chain Guide Bar ............................................................ 3/8" pitch,
.043" gauge, 10-inch Micro Lite™
Chain Type ............................................... 3/8" pitch Micro Lite™,
.043" gauge
Sprockets ........................................................3/8-inch, fixed spur
Gearcase Ratio ......................................................................1.06 : 1
Chain Speed ..................................................... 23.5 m (77 ft.)/sec.
@ 10,000 min
-1
(rpm)
Chain Lubrication ........................................................... Automatic
adjustable oiler
Chain Lubricant ............................................. Shindaiwa Premium
Bar and Chain Oil
Optional Equipment ...............................................Shoulder strap,
loop handle
Optional Bars ....................................................... 8-inch or 12-inch
EPA Emission
Compliance Period* ..................................................... Category A
* The EPA emission compliance referred to on the emission compliance label
located on the engine, indicates the number of operating hours for which the
engine has been shown to meet Federal emission requirements. Category C = 50
hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours (Extended).
6
Technical Specications
Product Description
Lower Tube
Handle
Grip
Ignition Switch
Coupler
Guide Bar and
Chain
Upper Tube
Throttle Trigger
Fuel Tank
Air Filter Assembly
Recoil Starter
Top Engine Cover
Screw
Powerhead Assembly
Spark Plug
Gearcase
Bar Oil Reservoir
Cutting Head
Assembly
Guide Bar and
Chain
Oil Filler Cap