Filter
Top Products
ASSEMBLY
CY84 03/08 Assembly Section 3-5
© 2008 Alamo Group Inc.
ASSEMBLY
Hydraulic or Manual Lift
Attach the Spring Assembly (Figure Asm-0038) to
the lug on the mower deck behind the Center
Gearbox. Retain using 3/4 x 3 capscrews and
locknuts. Install the Hydraulic Cylinder or the
manual Ratchet Lift Screw (Figure Asm-0039)
between the Axle Center Lug and the Lug directly
behind the Center Gearbox. Tighten the two Bolts
securely.
Wheels
Install the Wheels on the Wheel Hubs. NOTE: If
Laminated Tires are used, place the flat side of the
Lug Nut against the Wheel (Figure Op-42). Note
direction of travel and curvature of rubber segments
in tire and install as shown in (Figure Op-42).