Filter
Top Products
OPERATION
CY84 03/08 Operation Section 4-19
© 2008 Alamo Group Inc.
OPERATION
• Ensure deflectors and/or chainguards are in
position and not damaged. Replace worn,
broken, and missing pieces. OPS-R-0038
All Safety Shields, Guards and Safety devices including (but not
limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox
Shields, PTO integral shields, and Retractable Door Shields should
be used and maintained in good working condition. All safety devices should be
inspected carefully at least daily for missing or broken components. Missing, broken,
or worn items must be replaced at once to reduce the possibility of injury or death
from thrown objects, entanglement, or blade contact.
(SGM-3)
• Lift-Type - Ensure the tailwheel beam position
support bolts are properly intalled and
tightened.
• Pull-Type - Ensure that the tailwheel ratchet or
hydraulic cylinder is installed and retained
correctly to provide the desired cutting height.
• Inspect all bolts and screws and tighten to the
recommended torque. OPS-R-0045