Filter
Top Products
Safety Section 1-7LJ60/72 02-02
© 2004 Alamo Group Inc.
SAFETY
SAFETY
DANGER! All Safety Shields, Guards and Safety devices including
(but not limited to) - the Deflectors, Chain Guards, Steel
Guards, Gearbox Shields, Hydraulic Tank Shields, and
Retractable Door Shields should be used and main-
tained in good working condition. All safety devices
should be inspected carefully at least daily for missing
or broken components. Missing, broken, or worn items
must be replaced at once to reduce the possibility of
injury or death from thrown objects, entanglement, or
blade contact. (SGM-3)
DANGER!
The rotating parts of this machine have been designed and tested for rugged use. However,
they could fail upon impact with heavy, solid objects such as steel guard rails and concrete
abutments. Such impact could cause the broken objects to be thrown outward at very high
velocities. To reduce the possibility of property damage, serious injury, or even death, never
allow the cutting blades to contact such obstacles. (SGM-4)
WARNING!
Many varied objects, such as wire, cable, rope, or chains, can become entangled in the operating
parts of the mower head. These items could then swing outside the housing at greater velocities
than the blades. Such a situation is extremely hazardous and could result in serious injury or even
death. Inspect the cutting area for such objects before mowing. Remove any like object from the
site. Never allow the cutting blades to contact such items. (SGM-6)
WARNING!
Mow at the speed that you can safely operate and control the tractor and mower. Safe mowing
speed depends on terrain condition and grass type, density, and height of cut. Normal ground
speed range is from 0 to 5 mph. Use slow mowing speeds when operating on or near steep slopes,
ditches, drop-offs, overhead obstructions, power lines, or when debris and foreign objects are to
be avoided. (SGM-7)
WARNING!
Avoid mowing in reverse direction when possible. Check to make sure there are no persons are
behind the mower and use extreme care when mowing in reverse. Mow only at a slow ground
speed where you can safely operate and control the tractor and mower. Never mow an area in
the reverse direction that you have not inspected and removed debris or foreign material. (SGM-
8)
WARNING!
Do not put hands or feet under mower decks. Blade Contact can result
serious injury or even death. (SGM-9)
WARNING!
Extreme care should be taken when operating near loose objects
such as gravel, rocks, wire, and other debris. Inspect the area before
mowing. Foreign objects should be removed from the site to prevent
machine damage and/or bodily injury or even death. Any objects that
cannot be removed must be clearly marked and carefully avoided by
the operator. Stop mowing immediately if blades strike a foreign
object. Repair all damage and make certain rotor or blade carrier is
balanced before resuming mowing. (SGM-5)