OPERATION
FN10/FN15 NITRO 02/10 Operation Section 4-20
© 2010 Alamo Group Inc.
OPERATION
The operator’s manual and safety signs affixed on
the unit contain important instructions on the safe
and proper use of the equipment. Maintain these
important safety features on the implement in good
condition to ensure the information is available to
the operator at all times.
• Ensure the manual canister is secured to the
equipment with the operator’s manual inside.
• Ensure all safety signs are in place and legible.
Replace missing, damaged, and illegible
decals. OPS-U- 0011
• Ensure the mower hitch is securely attached to
the tractor drawbar with a proper size bolt and
secured nut.
• Ensure that a properly rated safety tow chain is
equipped securing the mower to the tractor.
• Check that the main driveline is securely
attached to the tractor and the clamping cone is
seated in the groove of the PTO shaft.
• Ensure the divider drivelines are secure at both
ends. OPS-R-0008
• Ensure chain guards and/or rubber deflectors
are in position and not damaged. Replace
worn, broken, and missing sections
immediately.
• Ensure the driveline integral shields are in good
condition and rotate freely.
• Inspect that all bolts and screws are in position
and are properly torqued. OPS-R-0009