Filter
Top Products
11
ATTACHING SHIELD
(for line tr immer attachment)
WARNING: Theshieldmustbeprop-
erly installed. The shield provides partial protec-
tion from the risk of thrown objects to the opera-
tor and others a nd is equipped with a line limiter
blade which cuts excess line to the proper
length. The line limiter blade (on underside of
shield) is sharp and can cut you.
For proper orientation of shield, see KNOW
YOUR TRIMMER AT TACHM ENT illu strationin
OPERAT ION section.
1. Remove wing nut from shield.
2. Insert bracket into slot as shown.
3. Pivot shielduntil boltpasses throughhole
in bracket.
4. Securely tighten wing nut onto bolt.
Slot
Shield
Wing
Nut
Bracket
Line Limiter
Blade
PIVOT
OPERATION
KNOW YOUR UNIT
READ THISINSTRUCTION MANUALAND SAFETYRULESBEFOREOPERA TINGYOURUNIT.
Compare the illustrations with your unit to familiarize yourself with t he location of the various controls
and adjustments. Save this manual for f uture reference.
Cord Retainer
Assist Ha ndle
Recessed
Plug
Trigger Switch
Motor Housing
Shaft
Coupler
Pruner
Chain
Bar
Bar oil fill cap
Bar nut
Shoulder S trap Clamp
Attachment
Hanger
Shield
Line Trimmer
Attachment
RECESSED PLUG
The RECESSED PLUG is where you attach
your extension cord to the unit.
TRIGGER SWITCH
TheTRIGGERSWITCHisusedtoturnonthe
unit.Squeezethetriggerswitchtooperatethe
unit. Release to stop.
COUPLER
The COUPLER enables optional attach-
ments t o be installed on the unit.
CHAIN TENSION
It is normal for a new chain to stretch during
first 15 minutes of operation. You should
check your chain tension frequently. See
CHAIN TENSION in the SERVICE ANDAD-
JUSTMENTS section.
OPERATING INSTRUCTIONS
Use only a voltage supply as specified on
your unit.
SELECT AN EXTENSION CORD
ExtensionCordGaugeChart
Length of Cord Gauge
25 Ft. (7.5 m)
50 Ft. (15 m)
100 Ft. (30 m)
18 Gauge
16 Gauge
14 Gauge
Extension cords a re available f or this unit .