Filter
Top Products
35
IntelliFlo Installation and User’s Guide
Vacuum Mode
Use Vacuum mode to clean the pool manually. Vacuum mode only operates in flow control. Vacuum mode
shuts off all sensors. This mode is identical to Feature 1 and 2 except that you can manually start this mode
using the Vacuum button. Safety considerations should be made when setting the Vacuum flow parameter.
CAUTION: Since vacuuming is manual work and the user will be at the pool, the “Blocked System”
will be switched off, it is important not to use any kind of automatic cleaners, (such as Kreepy
Krauly, etc.) with Vacuum mode.
Vacuum menu
To access the Vacuum menu:
1. Ensure that the green power LED is on and the pump is stopped.
2. Press the Menu button. Press the Up or Down arrows to select the “Vacuum”
menu.
3. To set the vacuum flow parameter: Press the Select button, the “Vacuum Flow”
parameter is displayed. To edit the vacuum preset flow parameter, see step 5.
This parameter can be set from 15 GPM to 130 GPM. The default setting is 50
GPM.
4. To set the vacuum duration parameter: Press the Up or Down arrows to select the
“Vacuum Duration” menu. To edit this setting, see step 5.
This parameter can be set from 1 to 600 minutes. The default setting
is 10 minutes. This setting is the amount of time you wish to run
vacuum mode.
5. To change the value, press the Left and Right arrows to select which
digit to modify, then use the Up and Down arrows to change the selected
digit.
6. When you are done, press the Enter button to save the changes. To
cancel any changes, press the Escape button to exit edit mode
without saving.
To start Vacuum mode:
1. Press the Vacuum button to start the vacuum mode and to run at the preset vacuum flow for the
preset vacuum cycle time.
2. After the preset cycle time, IntelliFlo will stop.
Vacuum Flow and Duration
Filter Vacuum
Back
Wash
Manual
Enter
Select
Start
Stop
Reset
Feature
2
Feature
1
Menu
Escape
On
Warn.
Alarm
IntelliFlo
®
Vacu
Vacu
um
um
8:13
8:13
Vacu
Vacu
um
um
Flow
Flow
50.GPM
50.GPM
Filter Vacuum
Back
Wash
Manual
Enter
Select
Start
Stop
Reset
Feature
2
Feature
1
Menu
Escape
On
Warn.
Alarm
IntelliFlo
®
Vacu
Vacu
um
um
8:22
8:22
Vacu
Vacu
um
um
Duration
Duration
0:01
0:01
Filter Vacuum
Back
Wash
Manual
Enter
Select
Reset
Feature
2
Feature
1
Menu
Escape
On
Warn.
Alarm
IntelliFlo
®
MENU
8:09
Vacuum
Start
Stop