Filter
Top Products
34
IntelliFlo Installation and User’s Guide
Running Backwash mode
To start Backwash mode:
1. Press the Backwash button.
2. When running in Backwash mode IntelliFlo will run at the preset backwash flow for the preset
backwash time.
3. When the Backwash mode is stopped, manually or after the preset Backwash cycle time, the
IntelliFlo will stop and show the “Rinse” menu option.
4. Press the Start Stop button after repositioning the backwash valve to rinse the filter.
5. When running in Rinse mode, the IntelliFlo will run at the preset backwash flow for the preset rinse time.
6. Once the pump has run in both Backwash and Rinse modes, the filter status will be recalculated in
filter mode.
7. After completing Backwash and Rinse, the backwash valve should be placed into the filter position,
unless other service is required.
Backwash menu screens
Backwash Flow Backwash Duration Rinse Duration
Filter Vacuum
Back
Wash
Manual
Enter
Select
Start
Stop
Reset
Feature
2
Feature
1
Menu
Escape
On
Warn.
Alarm
IntelliFlo
®
Backwash
Backwash
8:01
8:01
Backwash Flow
Backwash Flow
60.GPM
60.GPM
Filter Vacuum
Back
Wash
Manual
Enter
Select
Start
Stop
Reset
Feature
2
Feature
1
Menu
Escape
On
Warn.
Alarm
IntelliFlo
®
Backwash
Backwash
8:01
8:01
Backwash Duration
Backwash Duration
0:05
0:05
Filter Vacuum
Back
Wash
Manual
Enter
Select
Start
Stop
Reset
Feature
2
Feature
1
Menu
Escape
On
Warn.
Alarm
IntelliFlo
®
Backwash
Backwash
8:02
8:02
Rinse Duration
Rinse Duration
0:01
0:01