Filter
Top Products
25
IntelliFlo Installation and User’s Guide
Features Mode (Continued)
The functions of the Features groups are shown below:
How to set up the Feature 1 or 2 (Flow and Duration) mode
To access the Features menu:
1. Ensure that the green power LED is on and the pump is stopped.
2. Press the Menu button. Press the Up or Down arrows to select the “Features” menu. Press the
Select button to access the Feature 1 menu settings. The Features 1 menu setting is
displayed.
3. To set the flow rate for Feature 1 or 2: Press the Select button to access the
Feature 1 “Set Flow” setting. To edit the flow rate (GPM) setting, see step 6.
4. To set the duration for Feature 1 or 2: Press the Select button to access the
Feature 1 “Duration” setting. To edit the time (hours and minutes) setting, see step
6.
5. Press the Select button to change the current value of Feature 1 or 2.
6. To change the value, press the Left and Right arrows to select which digit to modify,
then use the Up and Down arrows to change the selected digit.
7. When you are done, press the Enter button to save the changes. To cancel any
changes, press the Escape button to exit edit mode without saving.
Feature
Groups
Features 3-9
Flow, Start / Stop Time
Features 1-2
Flow and Duration
MOFlo
Flow, Interval, Length of Interval
Filter Vacuum
Back
Wash
Manual
Enter
Select
Reset
Feature
2
Feature
1
Menu
Escape
On
Warn.
Alarm
IntelliFlo
®
MENU
12:45
Features
Start
Stop
Set Flow
Feature 1 displays
Filter Vacuum
Back
Wash
Manual
Enter
Select
Reset
Feature
2
Feature
1
Menu
Escape
On
Warn.
Alarm
IntelliFlo
®
Features
12:51
Feature 1
Start
Stop
Select
Filter Vacuum
Back
Wash
Manual
Enter
Select
Start
Stop
Reset
Feature
2
Feature
1
Menu
Escape
On
Warn.
Alarm
IntelliFlo
®
Feature 1
12:54
Set Flow
50.GPM