Filter
Top Products
7
IntelliFlo Installation and User’s Guide
Navigating the Menu Structure
Before navigating the control panel menu structure, first familiarize yourself with the menu buttons. To
change a parameter setting, use the Left and Right arrow buttons to select the digit, then the Up and Down
arrow buttons to edit the digit. The following example shows how to set the GPM and priming time in the
“Priming” menu (see page 14).
To set the “Priming” mode settings:
1. Ensure that the green power LED is on and the pump is stopped.
If the pump is running, press the Start/Stop button.
2. Press the Menu button. “Pool Data” is displayed.
3. Press the Down arrow to select “Priming”.
4. Press the Select button to access “Max Priming Flow” setting.
5. Set the GPM: Press the Select button to set the gallons per minute
(GPM) value.
6. To change the GPM value, press the Left and Right arrows to select
which digit to modify.
Press the Up and Down arrows to change the selected digit. For setting
values, see “Priming menu options” below.
7. When you are done, press the Enter button to save the changes. To
cancel any changes.
Press the Escape button to exit edit mode without saving.
8. Set the priming time: Use the Up and Down arrows to select “Max
Priming Time” and “System Priming Time.”
Press the Select to edit the setting.
9. Repeat steps 5, 6, and 7 to edit the setting.
MENU 12:15
Pool Data
MENU 12:15
Priming
MENU 12:15
Priming
Priming
Max Priming Flow
12:15
55. GPM
Priming
Max Priming Flow
12:15
12:15
12:15
12:15
12:15
0055. GPM
Priming
Max Priming Flow
0055. GPM
Priming
Max Priming Flow
0065. GPM
Priming
Max Priming Flow
0065. GPM
Priming
Max Priming Flow
0060. GPM
12:15Priming
Max Priming Flow
60. GPM
12:15Priming
Max Priming Time
15. MIN
12:15Priming
System Priming Time
0. MIN
Escape
Menu
Select
Start
Stop
Enter
Menu
Select
Select
5X
Enter
Escape
Priming Mode Example
Select
Select