Filter
Top Products
13
Section 2 Operation
03/11/03
Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M
Land Pride
Section 2
Operation
Controls
For general location of the controls described in this
section, refer to Figure 2-1.
Ignition Switch
Refer to Figure 2-2:
A three position switch: off, run, and start. With key
inserted, rotate it clockwise to START position; release
key when engine starts, and switch will automatically
return to the RUN position.
Throttle Control
Refer to Figure 2-2:
A cable is linked to engine throttle for controlling engine
speed. Move lever forward to increase engine rpm, move
lever rearward to decrease engine rpm.
Choke Control
Refer to Figure 2-2:
A cable is linked to manually operate the engine choke.
When the lever is in the down position, the choke is in the
off (run) position. When the lever is pulled up, the choke is
in the on (start) position. DO NOT operate the machine in
the on (start) position.
Control Panel
Figure 2-2
Ignition Switch
Blade Engagement
Switch
Oil Pressure
Light
Throttle
19097
Choke
1. Ignition Switch
2. Throttle Lever
3. Control Levers
4. Blade Engagement
Switch
5. Deck Lift Pedal
6. Hour Meter
7. Oil Pressure Light
8. Fuel Tanks
9. Hydraulic Reservoir
10. Battery
11. Deck Adjusting Rod
12. Anti-Scalp Wheels
13. Discharge Chute
14. Left Belt/Pulley Cover
15. Right Belt/Pulley Cover
16. Deck Height Indicator
17. Brake Switch
18. Choke Lever
Accu Z Controls
Figure 2-1
19058