Filter
Top Products
8
Section 1 Assembly and Set-Up
Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M 03/11/03
Land Pride
Refer to Figure 1-4:
6. Insert the air cleaner hose through the hole in the air
cleaner hood and slide hose end over the carburetor
intake.
7. Secure air cleaner to the air cleaner hood with two 5/
16” bolts, four 5/16” flat washers and two 5/16” nuts.
8. Secure hose tothe carburetor intake with hose clamp.
Optional Equipment Assemblies
Remote Air Cleaner Assembly
Refer to Figure 1-2 page 7:
The remote air cleaner is standard equipment on mowers
with Serial No. 364548 and above.
However, it may be purchased as an option on mowers
with Serial No. 364547 and below.
Control Lever Extensions
Refer to Figure 1-5:
1. Install the Extensions (#4) as shown.
Hose Clamp
5/16” Bolt
20860
Control Lever Assembly
Figure 1-5
19121
Figure 1-4
Air Cleaner