Filter
Top Products
4
Important Safety Information
SB1051, SB1064, SB1574, & SB2584 with S/N 881640- Snow Blowers 370-027M
10/08/14
Table of Contents
Safety Labels
Your Snow Blower comes equipped with all safety labels in
place. They were designed to help you safely operate your
implement. Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Refer to this section for proper label placement. Replace
all damaged or missing labels. Order new labelsfrom your
nearest Land Pride dealer. To find your nearest dealer,
visit our dealer locator at www.landpride.com.
3. Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4. Refer to this section for proper label placement.
To install new labels:
a. Clean the area the label is to be placed.
b. Spray soapy water on the surface where the label is to
be
placed.
c. Peel backing from label. Pressfirmly onto the surface.
d. Squeeze out air bubbles with the edge of a credit card
or with a similar type straight edge.
33247
33247
33249
818-798C
Warning: Pinch Point Hazard
818-205C
Warning: Moving Parts Hazard
818-522C
Danger: Moving Parts Hazard