Filter
Top Products
25
Section 6: Features and Benefits
6/26/06
RCS3596, RCSM3596, RCS3510 & RCSM3510 Series Rotary Cutters 312-708M
Land Pride
Table of Contents
Section 6: Features and Benefits
RCS(M)3596 & RCS(M)3510 Series
Features Benefits
Surpassed rugged
industry standards
All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing
procedures specified by ANSI.
Tractor HP range 30-120 HP.
540 or 1000 RPM Fits wider variety of tractors.
5 Year limited
gearbox warranty
Shows our confidence in the gearbox integrity.
3 Gearboxes Allows equal torque to be spread to left and right gearbox.
Gearbox HP rating 120 Horsepower on splitter gearbox and 100 HP on wing gearboxes.
Splined rubber flex-couplers
between center and
outboard gearboxes
Protects the driveline and gearboxes from hard objects in the blade path.
Slip-clutch protection
on main driveline
Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
Semi-mount categories Semi-mount allows for hydraulic offset. (Cat. 1 & 2 on 96” & Cat 2 & 3 on 10’-0”)
Offset capability Offset 13” right and left, hydraulically for time saving maneuverability.
Cutting Width 8’-2” on RCS3596 and 10’-0” on RCS3510.
10 Gauge deck, fully welded Fully welded deck adds rigidity.
1/4” Thick sidewalls Protects sidewalls from thrown objects.
Obstacle free underside Underside of deck is free of reinforcement members which tend to allow material to lodge.
Round back design Allows for cleaner and efficient discharge of material, helps eliminate damage to rear
corners by not sticking out.
Chain or rubber guards Reduces flying debris.
Full length skids with
replaceable shoes
Adds reinforcement to side panels. Replaceable shoes allow for change before wearing
through to weld-on piece.
Splined blade hub Splined blade hub offers tight non-slipping attachment to output shaft.
3/16” Round stump jumper Standard stump jumper aids in sliding over obstructions, which helps protect gearbox
output shaft.
1/2” x 4” Blade bar Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
1/2” x 4” Heat-treated blades Heat-treated blades last longer than non heat-treated blades.
2” Diameter cutting capacity Aids in cutting brush.
High Blade tip speed 96” deck width - (540 rpm = 14,223 fpm; 1000 rpm = 14,442 fpm)
10’-0” deck width (540 rpm = 17,291 fpm; 1000 rpm = 17,569 fpm)
Allows clean cutting of material.
Laminated tires Laminated tires can handle almost any condition and don’t go flat.
Quick hitch adaptable Both 96” and 10’-0” models are Quick Hitch Adaptable.