Land Pride Parallel Arm Rotary Cutter Brush Cutter User Manual


 
18
Section 3: Hydraulics
RCP2560 & RCPM2560 Series Parallel Arm Rotary Cutter 316-057M
4/28/08
Land Pride
Table of Contents
Hydraulic Cylinder Plumbing
The standard Parallel Arm Cutter is equipped with
three (3) remote cylinders to operate the parallel arms
and the cutter deck. These cylinders are connected
directly to the tractor's remote duplex outlets and
controlled by the tractor operator. Each cylinder
requires a single duplex outlet on the tractor. See
Figure 3-1.
An optional electric cylinder control provides for
toggle switch operation of each cylinder. Response
time is much faster than with tractor controls and this
option is recommended where frequent changes are
necessary because of terrain or cutting conditions.
Ditches and embankments are typical examples. The
electric cylinder control option can be easily added as a
field installation kit. See Figure 3-2.
Remote Cylinder Plumbing
Figure 3-1
Remote Cylinder Plumbing
(Optional Electric Cylinder Control)
Figure 3-2
12260
12261
Section 3: Hydraulics