Filter
Top Products
18
Section 4 Maintenance and Lubrication
DM35 Series (S/N253045+) Disc Mowers 309-502M
7/18/08
Land Pride
Table of Contents
Fastener Wear
Figure 5-2
15097
a
b
c
Cutter Bar Timing Adjustment
Removal of one or more disc shaft assemblies
Refer to Figure 5-3:
1. Rotate the long axis of the discs adjacent to the
replaced shaft assembly 90 degrees to the long axis of
the cutter bar.
2. Locate the round reference punch mark on the
underside of the gear. Orient the reference mark
parallel to the long axis of the cutter bar (90 degrees to
the axis of the adjacent discs).
Disc Assembly
Figure 5-3
10441