Filter
Top Products
16
Section 3 Adjustments
DM35 Series (S/N253045+) Disc Mowers 309-502M
7/18/08
Land Pride
Table of Contents
Belt Tension Adjustment
Figure 2-2
17896
17884
Belt Deflection
Figure 2-3
Cutting Height
Figure 2-4
15091
Maximum Cutting Height
Minimum Cutting Height
Cutting Height
Refer to Figure 2-4:
Cutting height can be adjusted with the upper 3-point hitch
link.
Maximum cutting height of 2” is achieved when the discs
are parallel to the ground. Adjustment of cutting height is
achieved by altering the cutter bar tilt angle. This is done
by varying the upper 3-point hitch link length until desired
cutting height is achieved. Shorten the upper
3-point hitch link to lower and lengthen to raise.
To minimize blade and disc wear, improve grass regrowth
and get maximum nutritive value from the crop, minimum
cutting height should never be adjusted less than 1 1/4“.