Filter
Top Products
Dimensions and SpeciƟcations with Hi-Vis Coupler and Construction Forks 624K Z-BAR / HIGH-LIFT / POWERLLEL / TOOL CARRIER
624K TOOL CARRIER LOADER WITH QUICK-COUPLER AND HOOK-ON CONSTRUCTION FORKS
Z-Bar Z-Bar High-Lift High-Lift Powerllel Powerllel Tool Carrier Tool Carrier
Dimensions with Forks 1.22-m (48 in.)
tine length
1.52-m (60 in.)
tine length
1.22-m (48 in.)
tine length
1.52-m (60 in.)
tine length
1.22-m (48 in.)
tine length
1.52-m (60 in.)
tine length
1.22-m (48 in.)
tine length
1.52-m (60 in.)
tine length
A Height to Top of Cab and Canopy 3.32 m (10 ft. 11 in.) 3.32 m (10 ft. 11 in.) 3.32 m (10 ft. 11 in.) 3.32 m (10 ft. 11 in.)
B Hood Height 2.46 m (8 ft. 1 in.) 2.46 m (8 ft. 1 in.) 2.46 m (8 ft. 1 in.) 2.46 m (8 ft. 1 in.)
C Ground Clearance 384 mm (15.1 in.) 384 mm (15.1 in.) 384 mm (15.1 in.) 384 mm (15.1 in.)
D Length from Centerline to
Front Axle
1.52 m (5 ft. 0 in.) 1.52 m (5 ft. 0 in.) 1.52 m (5 ft. 0 in.) 1.52 m (5 ft. 0 in.)
E Wheelbase 3.09 m (10 ft. 1 in.) 3.09 m (10 ft. 1 in.) 3.09 m (10 ft. 1 in.) 3.09 m (10 ft. 1 in.)
F Overall Length, Forks on Ground 8.18 m
(26 ft. 10 in.)
8.48 m
(27 ft. 10 in.)
8.60 m
(28 ft. 2 in.)
8.89 m
(29 ft. 2 in.)
8.30 m
(27 ft. 3 in.)
8.60 m
(28 ft. 3 in.)
8.02 m
(26 ft. 4 in.)
8.33 m
(27 ft. 4 in.)
G Height to Hinge Pin, Fully Raised 3.96 m (13 ft. 0 in.) 4.32 m (14 ft. 2 in.) 3.99 m (13 ft. 1 in.) 3.99 m (13 ft. 1 in.)
H Reach, Fully Raised 0.75 m (29.5 in.) 0.84 m (33 in.) 0.92 m (36 in.) 0.89 m (35 in.)
I Fork Height, Fully Raised 3.73 m (12 ft. 3 in.) 4.09 m (13 ft. 5 in.) 3.76 m (12 ft. 4 in.) 3.91 m (12 ft. 10 in.)
J Maximum Reach, Fork Level 1.58 m (5 ft. 2 in.) 1.92 m (6 ft. 4 in.) 1.77 m (5 ft. 10 in.) 1.65 m (5 ft. 5 in.)
K Fork Height, Maximum Reach 1.77 m (5 ft. 10 in.) 1.77 m (5 ft. 10 in.) 1.84 m (6 ft. 1 in.) 1.99 m (6 ft. 7 in.)
L Reach, Ground Level 0.96 m (3 ft. 2 in.) 1.40 m (4 ft. 7 in.) 1.11 m (3 ft. 8 in.) 0.88 m (35 in.)
M Depth Below Ground 23 mm (0.9 in.) 123 mm (4.8 in.) 19 mm (0.8 in.) 0 mm (0 in.)
N Tine Length 1.22 m (48 in.) 1.52 m (60 in.) 1.22 m (48 in.) 1.52 m (60 in.) 1.22 m (48 in.) 1.52 m (60 in.) 1.22 m (48 in.) 1.52 m (60 in.)
O Load Position, 50% Tine Length 0.61 m (24 in.) 0.76 m (30 in.) 0.61 m (24 in.) 0.76 m (30 in.) 0.61 m (24 in.) 0.76 m (30 in.) 0.61 m (24 in.) 0.76 m (30 in.)
SpeciƟcations with Forks
Tipping Load, Straight 9633 kg
(21,236 lb.)
9108 kg
(20,080 lb.)
8556 kg
(18,863 lb.)
8137 kg
(17,938 lb.)
9029 kg
(19,906 lb.)
8565 kg
(18,883 lb.)
9774 kg
(21,549 lb.)
9186 kg
(20,251 lb.)
Tipping Load, 40-deg. Turn 8340 kg
(18,387 lb.)
7879 kg
(17,371 lb.)
7380 kg
(16,269 lb.)
7012 kg
(15,458 lb.)
7799 kg
(17,193 lb.)
7392 kg
(16,297 lb.)
8496 kg
(18,729 lb.)
7968 kg
(17,566 lb.)
Rated Operating Load, 50% Full-
Turn Tipping Load (conforms to
ISO 14397-1 and SAE J1197)*
4170 kg
(9,193 lb.)
3939 kg
(8,685 lb.)
3690 kg
(8,135 lb.)
3506 kg
(7,729 lb.)
3900 kg
(8,597 lb.)
3696 kg
(8,148 lb.)
4248 kg
(9,365 lb.)
3984 kg
(8,783 lb.)
Rated Operating Load, Rough
Terrain, 60% Full-Turn Tipping
Load (conforms to EN474-3)*
5004 kg
(11,032 lb.)
4727 kg
(10,422 lb.)
4428 kg
(9,762 lb.)
4207 kg
(9,275 lb.)
4679 kg
(10,316 lb.)
4435 kg
(9,778 lb.)
5158 kg
(11,371 lb.)
4781 kg
(10,540 lb.)
Rated Operating Load, Firm
and Level Ground, 80% Full-
Turn Tipping Load (conforms
to EN474-3)*
6672 kg
(14,709 lb.)
6303 kg
(13,896 lb.)
5904 kg
(13,016 lb.)
5610 kg
(12,367 lb.)
6239 kg
(13,755 lb.)
5914 kg
(13,037 lb.)
6877 kg
(15,161 lb.)
6374 kg
(14,053 lb.)
Operating Weight 15 607 kg
(34,407 lb.)
15 650 kg
(34,502 lb.)
15 784 kg
(34,797 lb.)
15 414 kg
(33,982 lb.)
16 538 kg
(36,460 lb.)
16 581 kg
(36,554 lb.)
15 489 kg
(34,147 lb.)
15 532 kg
(34,242 lb.)
Loader operating information is based on machine with identiƟed linkage and standard equipment, PowerTech PVX 6068 (EPA Interim Tier 4/EU Stage IIIB) engine, ROPS
cab, rear cast bumper/counterweight, transmission side-frame guards, bottom guards, standard tires, full fuel tank, and 79-kg (175 lb.) operator. This information is
affected by changes in tires, ballast, and different attachments, and assumes no tire deƠection per the standard ISO 14397-1 section 5.
*Rated operating capacity based on Deere attachments only.
E
F
C
D
A
Cab and
Canopy
B
N
K
M
I
G
L
J
E
F
C
D
A
Cab and
Canopy
B
N
K
M
I
G
L
J
H
H
O
O
624K Z-BAR AND HIGH-LIFT LOADERS WITH QUICK-COUPLER
AND HOOK-ON CONSTRUCTION FORKS
624K POWERLLEL LOADER WITH QUICK-COUPLER
AND HOOK-ON CONSTRUCTION FORKS
E
F
C
D
A
Cab and
Canopy
B
N
K
M
I
G
L
J
H
O