Filter
Top Products
38
39
Dimensions and SpeciƟcations with Hi-Vis Coupler and Hook-On Bucket 624K Z-BAR / HIGH-LIFT / POWERLLEL / TOOL CARRIER
N
H
M
K
I
G
L
F
C
D
A
Cab and
Canopy
B
J
A
Cab and
Canopy
B
624K TOOL CARRIER LOADER WITH QUICK-COUPLER AND HOOK-ON BUCKET
Z-Bar High-Lift Powerllel Tool Carrier
Dimensions with Bucket 2.7-m
3
(3.5 cu. yd.) general-
purpose with bolt-on edge
2.7-m
3
(3.5 cu. yd.) general-
purpose with bolt-on edge
2.7-m
3
(3.5 cu. yd.) general-
purpose with bolt-on edge
2.7-m
3
(3.5 cu. yd.) general-
purpose with bolt-on edge
A Height to Top of Cab and Canopy 3.32 m (10 ft. 11 in.) 3.32 m (10 ft. 11 in.) 3.32 m (10 ft. 11 in.) 3.32 m (10 ft. 11 in.)
B Hood Height 2.46 m (8 ft. 1 in.) 2.46 m (8 ft. 1 in.) 2.46 m (8 ft. 1 in.) 2.46 m (8 ft. 1 in.)
C Ground Clearance 384 mm (15.1 in.) 384 mm (15.1 in.) 384 mm (15.1 in.) 384 mm (15.1 in.)
D Length from Centerline to Front Axle 1.52 m (5 ft. 0 in.) 1.52 m (5 ft. 0 in.) 1.52 m (5 ft. 0 in.) 1.52 m (5 ft. 0 in.)
E Wheelbase 3.09 m (10 ft. 1 in.) 3.09 m (10 ft. 1 in.) 3.09 m (10 ft. 1 in.) 3.09 m (10 ft. 1 in.)
F Overall Length, Bucket on Ground 7.98 m (26 ft. 2 in.) 8.39 m (27 ft. 6 in.) 8.13 m (26 ft. 8 in.) 7.95 m (26 ft. 1 in.)
G Height to Hinge Pin, Fully Raised 3.96 m (13 ft. 0 in.) 4.32 m (14 ft. 2 in.) 3.99 m (13 ft. 1 in.) 3.99 m (13 ft. 1 in.)
H Dump Clearance, 45 deg., Full Height 2.69 m (8 ft. 10 in.) 3.06 m (10 ft. 1 in.) 2.70 m (8 ft. 10 in.) 2.81 m (9 ft. 3 in.)
I Reach, 45-deg. Dump, Full Height 1.11 m (3 ft. 8 in.) 1.20 m (3 ft. 11 in.) 1.28 m (4 ft. 2 in.) 1.45 m (4 ft. 9 in.)
J Reach, 45-deg. Dump, 2.13-m
(7 ft. 0 in.) Clearance
1.56 m (5 ft. 2 in.) 1.94 m (6 ft. 4 in.) 1.75 m (5 ft. 9 in.) 1.85 m (6 ft. 1 in.)
K Maximum Digging Depth 165 mm (6.5 in.) 262 mm (10.3 in.) 119 mm (4.7 in.) 102 mm (4.0 in.)
L Maximum Rollback at Ground Level 39 deg. 39 deg. 42 deg. 49 deg.
M Maximum Rollback, Boom Fully
Raised
55 deg. 48 deg. 52 deg. 64 deg.
N Maximum Bucket Dump Angle,
Fully Raised
45 deg. 42 deg. 46 deg. 43 deg.
Loader Clearance Circle, Bucket Carry
Position
12.38 m (40 ft. 7 in.) 12.77 m (41 ft. 11 in.) 12.60 m (41 ft. 4 in.) 12.26 m (40 ft. 3 in.)
SpeciƟcations with Bucket
Capacity, Heaped 2.7 m
3
(3.5 cu. yd.) 2.7 m
3
(3.5 cu. yd.) 2.7 m
3
(3.5 cu. yd.) 2.7 m
3
(3.5 cu. yd.)
Capacity, Struck 2.3 m
3
(3.0 cu. yd.) 2.3 m
3
(3.0 cu. yd.) 2.3 m
3
(3.0 cu. yd.) 2.3 m
3
(3.0 cu. yd.)
Bucket Weight with Bolt-On
Cutting Edge
1532 kg (3,378 lb.) 1532 kg (3,378 lb.) 1562 kg (3,444 lb.) 1077 kg (2,375 lb.)
Bucket Width 2.69 m (8 ft. 10 in.) 2.69 m (8 ft. 10 in.) 2.69 m (8 ft. 10 in.) 2.69 m (8 ft. 10 in.)
Breakout Force 10 983 kg (24,214 lb.) 9998 kg (22,042 lb.) 10 759 kg (23,719 lb.) 10 978 kg (24,202 lb.)
Tipping Load, Straight 12 373 kg (27,279 lb.) 10 431 kg (22,997 lb.) 10 877 kg (23,980 lb.) 12 808 kg (28,236 lb.)
Tipping Load, 40-deg. Full Turn 10 669 kg (23,521 lb.) 8952 kg (19,737 lb.) 9348 kg (20,609 lb.) 11 079 kg (24,426 lb.)
Rated Operating Load, 50% Full-
Turn Tipping Load (conforms to
ISO 14397-1)*
5335 kg (11,761 lb.) 4476 kg (9,868 lb.) 4674 kg (10,304 lb.) 5540 kg (12,213 lb.)
Operating Weight 15 887 kg (35,025 lb.) 16 083 kg (35,458 lb.) 16 905 kg (37,268 lb.) 15 856 kg (34,956 lb.)
Loader operating information is based on machine with identiƟed linkage and standard equipment, PowerTech PVX 6068 (EPA Interim Tier 4/EU Stage IIIB) engine,
ROPS cab, rear cast bumper/counterweight, transmission side-frame guards, bottom guards, standard tires, full fuel tank, and 79-kg (175 lb.) operator. This infor-
mation is affected by changes in tires, ballast, and different attachments, and assumes no tire deƠection per the standard ISO 14397-1 section 5.
*Rated operating capacity based on Deere attachments only.
624K Z-BAR AND HIGH-LIFT LOADERS WITH QUICK-COUPLER
AND HOOK-ON BUCKET
624K POWERLLEL LOADER WITH QUICK-COUPLER
AND HOOK-ON BUCKET
E
N
H
M
K
I
G
L
F
C
D
J
E
N
E
H
M
K
I
G
L
F
C
D
A
Cab and
Canopy
B
J