Filter
Top Products
Dimensions and SpeciƟcations with
Hi-Vis Coupler and Construction Forks
444K Z-BAR / HIGH-LIFT / POWERLLEL
444K Z-BAR AND HIGH-LIFT LOADERS WITH QUICK-COUPLER
AND HOOK-ON CONSTRUCTION FORKS
444K POWERLLEL LOADER WITH QUICK-COUPLER
AND HOOK-ON CONSTRUCTION FORKS
Z-Bar Z-Bar High-Lift High-Lift Powerllel Powerllel
Dimensions with Forks 1.22-m (48 in.)
tine length
1.52-m (60 in.)
tine length
1.22-m (48 in.)
tine length
1.52-m (60 in.)
tine length
1.22-m (48 in.)
tine length
1.52-m (60 in.)
tine length
A Height to Top of Cab and Canopy 3.17 m (10 ft. 5 in.) 3.17 m (10 ft. 5 in.) 3.17 m (10 ft. 5 in.) 3.17 m (10 ft. 5 in.) 3.17 m (10 ft. 5 in.) 3.17 m (10 ft. 5 in.)
B Hood Height 2.19 m (7 ft. 2 in.) 2.19 m (7 ft. 2 in.) 2.19 m (7 ft. 2 in.) 2.19 m (7 ft. 2 in.) 2.19 m (7 ft. 2 in.) 2.19 m (7 ft. 2 in.)
C Ground Clearance 393 mm (15.5 in.) 393 mm (15.5 in.) 393 mm (15.5 in.) 393 mm (15.5 in.) 393 mm (15.5 in.) 393 mm (15.5 in.)
D Length from Centerline to Front Axle 1.37 m (4 ft. 6 in.) 1.37 m (4 ft. 6 in.) 1.37 m (4 ft. 6 in.) 1.37 m (4 ft. 6 in.) 1.37 m (4 ft. 6 in.) 1.37 m (4 ft. 6 in.)
E Wheelbase 2.76 m (9 ft. 1 in.) 2.76 m (9 ft. 1 in.) 2.76 m (9 ft. 1 in.) 2.76 m (9 ft. 1 in.) 2.76 m (9 ft. 1 in.) 2.76 m (9 ft. 1 in.)
F Overall Length, Forks on Ground 7.45 m (24 ft. 5 in.) 7.77 m (25 ft. 6 in.) 7.79 m (25 ft. 7 in.) 8.09 m (26 ft. 6 in.) 7.52 m (24 ft. 8 in.) 7.82 m (25 ft. 8 in.)
G Height to Hinge Pin, Fully Raised 3.60 m
(11 ft. 10 in.)
3.60 m
(11 ft. 10 in.)
3.99 m
(13 ft. 1 in.)
3.99 m
(13 ft. 1 in.)
3.67 m
(12 ft. 0 in.)
3.67 m
(12 ft. 0 in.)
H Reach, Fully Raised 0.86 m (34 in.) 0.86 m (34 in.) 0.86 m (34 in.) 0.86 m (34 in.) 0.86 m (34 in.) 0.86 m (34 in.)
I Fork Height, Fully Raised 3.44 m
(11 ft. 3 in.)
3.44 m
(11 ft. 3 in.)
3.79 m
(12 ft. 5 in.)
3.79 m
(12 ft. 5 in.)
3.51 m
(11 ft. 6 in.)
3.51 m
(11 ft. 6 in.)
J Maximum Reach, Fork Level 1.57 m (5 ft. 2 in.) 1.57 m (5 ft. 2 in.) 1.84 m (6 ft. 0 in.) 1.84 m (6 ft. 0 in.) 1.63 m (5 ft. 4 in.) 1.63 m (5 ft. 4 in.)
K Fork Height, Maximum Reach 1.69 m (5 ft. 6 in.) 1.69 m (5 ft. 6 in.) 1.70 m (5 ft. 7 in.) 1.70 m (5 ft. 7 in.) 1.73 m (5 ft. 8 in.) 1.73 m (5 ft. 8 in.)
L Reach, Ground Level 0.97 m (3 ft. 2 in.) 0.97 m (3 ft. 2 in.) 1.31 m (4 ft. 4 in.) 1.31 m (4 ft. 4 in.) 0.96 m (3 ft. 2 in.) 0.96 m (3 ft. 2 in.)
M Depth Below Ground 107 mm (4.2 in.) 107 mm (4.2 in.) 16 mm (0.6 in.) 16 mm (0.6 in.) 2 mm (0.1 in.) 2 mm (0.1 in.)
N Tine Length 1.22 m (48 in.) 1.52 m (60 in.) 1.22 m (48 in.) 1.52 m (60 in.) 1.22 m (48 in.) 1.52 m (60 in.)
O Load Position, 50% Tine Length 0.61 m (24 in.) 0.76 m (30 in.) 0.61 m (24 in.) 0.76 m (30 in.) 0.61 m (24 in.) 0.76 m (30 in.)
SpeciƟcations with Forks
Tipping Load, Straight 6150 kg (13,558 lb.) 5790 kg (12,765 lb.) 5561 kg (12,261 lb.) 5255 kg (11,584 lb.) 5858 kg (12,915 lb.) 5529 kg (12,188 lb.)
Tipping Load, 40-deg. Turn 5344 kg (11,781 lb.) 5025 kg (11,077 lb.) 4814 kg (10,614 lb.) 4542 kg (10,014 lb.) 5081 kg (11,201 lb.) 4789 kg (10,557 lb.)
Rated Operating Load, 50% Full-Turn
Tipping Load (conforms to ISO 14397-1
and SAE J1197)*
2672 kg (5,891 lb.) 2512 kg (5,539 lb.) 2407 kg (5,307 lb.) 2271 kg (5,007 lb.) 2541 kg (5,601 lb.) 2395 kg (5,279 lb.)
Rated Operating Load, Rough Terrain,
60% Full-Turn Tipping Load (conforms
to EN474-3)*
3206 kg (7,069 lb.) 3015 kg (6,647 lb.) 2888 kg (6,368 lb.) 2725 kg (6,008 lb.) 3049 kg (6,721 lb.) 2873 kg (6,335 lb.)
Rated Operating Load, Firm and Level
Ground, 80% Full-Turn Tipping Load
(conforms to EN474-3)*
4275 kg (9,425 lb.) 4020 kg (8,863 lb.) 3851 kg (8,490 lb.) 3634 kg (8,011 lb.) 4065 kg (8,961 lb.) 3831 kg (8,446 lb.)
Operating Weight 11 350 kg
(25,022 lb.)
11 393 kg
(25,117 lb.)
11 513 kg
(25,381 lb.)
11 556 kg
(25,476 lb.)
12 024 kg
(26,509 lb.)
12 067 kg
(26,603 lb.)
Loader operating information is based on machine with identiƟed linkage and standard equipment, PowerTech PVX 4045 (EPA Interim Tier 4/EU Stage IIIB) engine, ROPS
cab, rear cast bumper/counterweight, transmission side-frame guards, bottom guards, standard tires, full fuel tank, and 79-kg (175 lb.) operator. This information is
affected by changes in tires, ballast, and different attachments, and assumes no tire deƠection per the standard ISO 14397-1 section 5.
*Rated operating capacity based on Deere attachments only.
E
F
CD
A
Cab and
Canopy
B
N
K
M
I
G
L
J
E
F
CD
A
Cab and
Canopy
B
N
K
M
I
G
L
J
H H
O
O