Filter
Top Products
26
27
Dimensions and SpeciƟcations with
Hi-Vis Coupler and Hook-On Bucket
524K Z-BAR / HIGH-LIFT
524K Z-BAR AND HIGH-LIFT LOADERS WITH QUICK-COUPLER AND HOOK-ON BUCKET
Z-Bar Z-Bar High-Lift High-Lift
Dimensions with Bucket 1.9-m
3
(2.5 cu. yd.) general-
purpose with bolt-on edge
2.1-m
3
(2.75 cu. yd.) general-
purpose with bolt-on edge
1.9-m
3
(2.5 cu. yd.) general-
purpose with bolt-on edge
2.1-m
3
(2.75 cu. yd.) general-
purpose with bolt-on edge
A Height to Top of Cab and Canopy 3.25 m (10 ft. 8 in.) 3.25 m (10 ft. 8 in.) 3.25 m (10 ft. 8 in.) 3.25 m (10 ft. 8 in.)
B Hood Height 2.30 m (7 ft. 7 in.) 2.30 m (7 ft. 7 in.) 2.30 m (7 ft. 7 in.) 2.30 m (7 ft. 7 in.)
C Ground Clearance 400 mm (15.7 in.) 400 mm (15.7 in.) 400 mm (15.7 in.) 400 mm (15.7 in.)
D Length from Centerline to Front Axle 1.45 m (4 ft. 9 in.) 1.45 m (4 ft. 9 in.) 1.45 m (4 ft. 9 in.) 1.45 m (4 ft. 9 in.)
E Wheelbase 2.93 m (9 ft. 7 in.) 2.93 m (9 ft. 7 in.) 2.93 m (9 ft. 7 in.) 2.93 m (9 ft. 7 in.)
F Overall Length, Bucket on Ground 7.48 m (24 ft. 6 in.) 7.57 m (24 ft. 10 in.) 7.80 m (25 ft. 7 in.) 7.90 m (25 ft. 11 in.)
G Height to Hinge Pin, Fully Raised 3.77 m (12 ft. 5 in.) 3.77 m (12 ft. 5 in.) 4.12 m (13 ft. 6 in.) 4.12 m (13 ft. 6 in.)
H Dump Clearance, 45 deg., Full Height 2.67 m (8 ft. 9 in.) 2.61 m (8 ft. 7 in.) 3.02 m (9 ft. 11 in.) 2.96 m (9 ft. 8 in.)
I Reach, 45-deg. Dump, Full Height 1.03 m (3 ft. 5 in.) 1.10 m (3 ft. 7 in.) 1.05 m (3 ft. 5 in.) 1.11 m (3 ft. 8 in.)
J Reach, 45-deg. Dump, 2.13-m
(7 ft. 0 in.) Clearance
1.44 m (4 ft. 9 in.) 1.47 m (4 ft. 10 in.) 1.74 m (5 ft. 8 in.) 1.77 m (5 ft. 10 in.)
K Maximum Digging Depth 146 mm (5.7 in.) 146 mm (5.7 in.) 226 mm (10.3 in.) 226 mm (10.3 in.)
L Maximum Rollback at Ground Level 40 deg. 40 deg. 45 deg. 45 deg.
M Maximum Rollback, Boom Fully
Raised
54 deg. 54 deg. 48 deg. 48 deg.
N Maximum Bucket Dump Angle,
Fully Raised
48 deg. 48 deg. 48 deg. 48 deg.
Loader Clearance Circle, Bucket Carry
Position
11.72 m (38 ft. 6 in.) 11.77 m (38 ft. 7 in.) 12.01 m (39 ft. 5 in.) 12.08 m (39 ft. 8 in.)
SpeciƟcations with Bucket
Capacity, Heaped 1.9 m
3
(2.5 cu. yd.) 2.1 m
3
(2.75 cu. yd.) 1.9 m
3
(2.5 cu. yd.) 2.1 m
3
(2.75 cu. yd.)
Capacity, Struck 1.6 m
3
(2.1 cu. yd.) 1.7 m
3
(2.27 cu. yd.) 1.6 m
3
(2.1 cu. yd.) 1.7 m
3
(2.27 cu. yd.)
Bucket Weight with Bolt-On
Cutting Edge
1294 kg (2,853 lb.) 1369 kg (3,018 lb.) 1302 kg (2,871 lb.) 1377 kg (3,037 lb.)
Bucket Width 2.54 m (8 ft. 4 in.) 2.54 m (8 ft. 4 in.) 2.54 m (8 ft. 4 in.) 2.54 m (8 ft. 4 in.)
Breakout Force 8182 kg (18,038 lb.) 7567 kg (16,682 lb.) 7552 kg (16,649 lb.) 6984 kg (15,397 lb.)
Tipping Load, Straight 9177 kg (20,232 lb.) 9027 kg (19,902 lb.) 7902 kg (17,420 lb.) 7760 kg (17,108 lb.)
Tipping Load, 40-deg. Full Turn 7936 kg (17,495 lb.) 7795 kg (17,185 lb.) 6800 kg (14,991 lb.) 6666 kg (14,697 lb.)
Rated Operating Load, 50% Full-
Turn Tipping Load (conforms to
ISO 14397-1)*
3968 kg (8,748 lb.) 3898 kg (8,593 lb.) 3400 kg (7,496 lb.) 3333 kg (7,348 lb.)
Operating Weight 12 771 kg (28,156 lb.) 12 848 kg (28,326 lb.) 12 964 kg (28,581 lb.) 13 042 kg (28,752 lb.)
Loader operating information is based on machine with identiƟed linkage and standard equipment, PowerTech PVX 6068 (EPA Interim Tier 4/EU Stage IIIB) engine,
ROPS cab, rear cast bumper/counterweight, transmission side-frame guards, bottom guards, standard tires, full fuel tank, and 79-kg (175 lb.) operator. This infor-
mation is affected by changes in tires, ballast, and different attachments, and assumes no tire deƠection per the standard ISO 14397-1 section 5.
*Rated operating capacity based on Deere attachments only.
N
E
H
M
K
I
G
L
F
C
D
A
Cab and
Canopy
B
J