Filter
Top Products
60 Parts
5WPMAN0862 (11/22/2010)
HYDRAULIC LATCH RELEASE KIT (OPTIONAL)
INSTALLATION INSTRUCTION
1. Remove four 1/3 NC x 2 hex head cap screws and
1/2” flat washers from top of shield on trailer.
2. Attach item 1 on top of shield using hardware
previously removed.
3. Attach item 2 to wing release lever using items 10
and 11.
4. Attach base end of cylinder (3) to item 1 using items
7, 8, and 9. Cylinder ports should be pointing upward
.
5. Attach rod end of cylinder (3) to item 2 using items 7,
8, and 9.
6. Install reducers (4), elbows (5), and hoses to base of
cylinder.
REF PART QTY DESCRIPTION
5WD1032454 TBW Hydraulic Latch Release Kit
1 5WP1032479 1 Release Base
2 5WP1032489 1 Slide Channel
3 5WP29547 1 3 x 8 Hydraulic Cylinder
4 5WP11893 2 Busing, Pipe Reducing 1/2 x 1/74
5 5WP10290 2 Elbow, 90° 3/32 RSTR 1/4 x 1/4
6 5WP17628 2 Hose, HP 1/4 NPT x 108
7 5WP8345 2 Pin, 1 x 4.08 Headless
8 * Cotter Pin, 1/4 x 1-1/2
9 * 1" Standard Flat Washer
10 * 3/8 NC x 1 HHCS GR5
11 * 3/8 NC Flange Lock Nut
HHCS
Hex Head Cap Screw
* Standard hardware, obtain locally
(Rev. 10/18/2012)