Filter
Top Products
24
Attach Front Panels to Unit
Remove this screw
before operation
Ground
Wire
Speaker and
power leads
B
Antenna
Wire
Rear view of CD/radio
Screw (2)
Tinnerman® Nuts
(pre-installed)
Front
Panel
B
C
D
D
Front Panel
Velcro®
Screw (2)
L
Important: Attach
CD/Radio ground
wire here
Velcro®
B
A
A
C
Frame
Screw - to be removed to permit
attachment of CD/Radio ground wire.
Put ground wire terminal between
lockwashers and retighten screw.
Attach both left and right front panels with pre-installed Velcro®. On the left front panel, install 2 screws through the top of
the panel. Connect the CD/radio ground wire, speaker/power connector and antenna wire before installing left front panel.
Ground wire is bolted to the seat wall frame.
J-Dream II Owner's Manual