Filter
Top Products
17
Attach Door Frame to Angle Brackets and Base Frame
Before proceeding, make sure the seat walls are closed and fastened. See detail B on page 15. Align door frame
over tabs on base frame and pan lip. Pan lip is to fit into corner posts of door frame. Align holes along sides of door
frame with angle brackets and mark this position of the angle brackets. Remove door frame and angle bracket screws.
Apply the silicone caulk and reinstall the angle brackets at the marked position. Insert screws and tighten. Reposition the
door frame and install screws through angle brackets into door frame post. Then install bolts (2) through frame tabs into
door frame. Do not over tighten. Do not silicone caulk angle brackets to door frame as they allow service access to
equipment.
Enclosure
Post
Panel #1
Angle Bracket
Screw (3)
E
Enclosure
Post
Panel #4
Angle Bracket
Screw (3)
E
Enclosure
Post
Base Frame
Bolt (2)
H
A
A
B
C
C
B
Washer (2)
I
Panel #1
Panel #4
J-Dream II Owner's Manual