Filter
Top Products
21
Connect the hoses routed from the back wall as below (grayed lines are pre-attached). Connect the controller line. The
red and black leads in the CD/Radio wire bundle must be hooked up to the corresponding colored leads of the power
supply. Connect the speaker leads. Connect the two SteamPro power cords after unraveling them.
J-Dream II Owner's Manual
Right Seat Wall (Equipment Wall)
From Backwall
From Backwall
Power Cords from
SteamPros
From Bottom of Mixer
on Backwall
Adaptor Jack
CD Power and
Speaker Wires
From Backwall
(Diconnect This Hose
When Accessing
Equipment on This
Seat Wall)
Cascade Tee
Red (+) lead
Black (-) lead
CD/Radio
power supply
Manifold
From
mixer
Back of Right Seat Wall
Steam Line from Backwall
(with black insulation cover)
1367
Valve #
A
B
B
A
Bonding
Wire
54 2
From Control Panel
To Tee on Cold
Water Line