Filter
Top Products
Page 84
J-400 Series
5. Accessing Preset Stations
Press and hold ENT/SH button (9) until
display reads “SHIFT”. Repeatedly press
TUN up or down button (2) to choose
preset 1-6, then press ENT/SH button
(9) to conrm selection.
19.4 J-1000 Audio System CD Player
Operation
1.
Open front panel (16) by pressing rmly
on release button (15) and lifting panel upward from bottom edge.
Gently insert CD into slot (14) with label facing up. The CD will be
drawn inside by the motorized mechanism. DO NOT FORCE! Close
front panel by folding down, then press rmly on panel directly
above release latch (15) until you hear an audible “click”. Keep front
panel closed at all the times to prevent water intrusion, except when
changing discs. CD playback will automatically begin after CD is
loaded. A “S-CDP” icon on the display indicates that a disc is inside
the mechanism.
To Play CD: Press the MODE button (4) to change to CD mode. •
The CD will play. The display shows current track, play time, and
animates a 3-D rotating disc during playback.
To Remove CD: Open the front panel and press CD eject button •
(13). Remove CD from drive and close front panel as instructed in
step 12 (page 83).
2. Changing CD Tracks and Music Seek
To advance to next track, press TUN up button (2) once to increase
track counter one track. When nal CD track is reached, play will
resume on track #1.
To fast forward through tracks: Press and hold TUN up button (2) •
until track counter displays desired track, then release button.
To rewind current track: Press and hold the TUN down button (2) the •
track will quickly rewind until you release the button.
Note: It will go back to the beginning of the playing track when you press
the Tune/Seek down button once, and it will go back to the previous track
when you press the button once again.
Random Mode: Press SH button (9) to play the CD tracks in random •
order. The left side of the display (17) reads “RDM” when random
mode is enabled. Press a second time to deactivate.
Repeat Mode: Press BND button (8) to repeat current CD track. The •
left side of the display reads “RPT” when repeat mode is enabled.
Press a second time to deactivate.
1
2
17
3
98
75
46
10
11
13
15
12
16
14
18