Filter
Top Products
Page 97
J-400 Series
6. NAND Folder Operation
To access the NAND menu, select the USB feature and
then press the Up button. You can scan through the fold-
ers, track numbers and adjust the volume with the remote.
Using the Navigational Quad Keypad you can:
Increase the volume by pressing the Up button.•
Decrease the volume by pressing the Down button.•
Go to the previous track by pressing the Left button.•
Go to the next track by pressing the Right button.•
Pause or play by pressing the Select button.•
Turn off the system by pressing and holding the Select button for •
longer than 3 seconds.
Go to the Main Menu by pressing the Return button.•
7. Auxiliary Operation
You can control the volume of an auxiliary device. Using
the Navigational Quad Keypad you can (Figure H):
Increase the volume by pressing the Up button.•
Decrease the volume by pressing the Down button.•
Turn off the system by pressing and holding the Select •
button for longer than 3 seconds.
Go to the Main Menu by pressing the Return button.•
Note: Remote control has no effect on MP3 Player playback if/when the
generic MP3 cable output is used.
WARNING: RISK OF ELECTRICAL SHOCK HAZARD
EXISTS AND EQUIPMENT DAMAGE!
Never install, handle or remove MP3 Player while hands are
wet or while sitting partially or fully immersed.
8. iPod® Operation
You can scan through the track numbers, play or
pause and adjust the volume with the remote. When
you are in the iPod mode the screen will appear
like Figure I; then it will change to the track duration
screen for the track. Using the Navigational Quad
Keypad you can:
Increase the volume by pressing the Up button.•
Decrease the volume by pressing the Down button.•
Go to the previous track by pressing the Left button. Go to the next •
track by pressing the Right button.
Pause or play by pressing the Select button.•
Turn off the system by pressing and holding the Select button for •
longer than 3 seconds.
Go to the Main Menu by pressing the Return button.•
Figure G
Figure H
AUX
iPod
Figure I