Filter
Top Products
Page 53
J-400 Series
3. To increase or decrease light intensity, use the Navigational Quad
Keypad as follows:
Press the Up button to increase the intensity in 25% increments.•
Pres• s the Down button to decrease the intensity in 25% increments.
Note: The intensity range is from 25% to 100%, in increments of 25%.As
the intensity is increased the bulb will darken to reect the effect (Figure
D, page 52). Intensity defaults to the last setting used.
4. Press button A to deactivate light rotation mode and select a solid
color (the last color and intensity used).
5. Press button B go to exterior lights - Feature is not available.
6. Press button C to turn off the interior lights.
7. Press button D to return to Main Menu.
11.4 Optional Exterior Lighting
Exterior lighting is not available
(Figure G).
11.5 Adjusting Individual Jet Flow
The water ow to certain jets in your spa can be increased or
decreased by rotating the outside jet face.
Note: Always keep at least 6 adjustable jets open at all times.
11.6 Adjusting PowerPro™ MX2 Jets
Tilt PowerPro MX2 Jet nozzle to angle of choice as desired.
Rotate nozzle clockwise to reduce ow volume from jet or
rotate counterclockwise to increase ow volume.
Note: Always keep at least 6 adjustable jets open at all times.
11.7 Adjusting RX Jets
Turn center jet adjustment knob clockwise to decrease or
shut off water ow. Turn center jet adjustment knob
counterclockwise to turn on or increase water ow.
Note: Always keep at least 6 adjustable jets open at all times.
EXTERIOR
Feature not installed
Figure G