Filter
Top Products
Page 62
J-400 Series
8. Press the Splash button on the Quad keypad to save your changes
and return to the Heating Menu. At this point you can program a
Secondary Heating Mode (Program B) or to continue on to the
Filtering programming (see Section 13.5, page 64).
B.
1. To program the Secondary Heating
mode press the Down button on the
Quad Keypad to highlight “Program
B” (Figure H). Press the Splash
button to enter the submenus for
Program B.
2. From this menu (Figure I), you can
set the days, times, and duration.
With “Day Settings” highlighted,
press the Splash button on the Quad
Keypad to conrm selection.
3. When you enter the submenu
(Figure J), you can choose the
day(s) you would like “Program B” to
run for a heating cycle. Press the Up
or Down button (on the Quad
keypad) to scroll through and change
the days you would like the heating
to activate. Press the Left or Right
button to turn on ( ) or off the heating for that day.
4. Press the Splash button once to save settings.
5. Press button D on the Quad Keypad to return to the submenu to
continue programming the start time and duration (Figure I).
PROGRAMMABLE
Program A
Press to set
Select
B
Program B
A
Program B
B
Figure H
PROGRAM B
Start Time
Day Settings
Duration
Select
B
Day Settings
Press to save
Figure I
Figure J
PROGRAM B
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Select
B
Press to enter
Monday
OFF
OFF
OFF
OFF
OFF
OFF
OFF