Filter
Top Products
70 Automower from
8. Maintenance
™
8. Maintenance
Check and clean the Automower from Husqvarna™
regularly and replace worn parts if necessary to
improve operating reliability and to ensure a longer
service life. For further information on cleaning, see
8.5
Cleaning on page 72.
During the initial period Automower is used the blade
disc, skid plate and blades should be checked once a
week. If the amount of wear during this period has
been low, the inspection interval can be increased.
It is important that the blade disc rotates easily. In
addition the skid plate should rotate easily in relation to
the blade disc. The edges of the blades should not be
damaged. The service life of the blades depends on:
• Operating time and size of the working area.
• Type of grass.
• Type of soil.
• The presence of objects such as cones, windfalls,
toys, tools, stones, roots and the like.
The service life can vary greatly, but is normally
2-4
weeks of operation over areas larger than
1,000
m
2
and longer in smaller areas. To replace the
blades, see
8.6 Replacing the blades on page 73.
IMPORTANT INFORMATION
Working with dull blades gives a poorer
mowing result. The edges of the grass are
not cut clean and more energy is needed
resulting in the Automower not mowing such
a large area.