Filter
Top Products
24 Automower from
3. Installation
™
• The boundary wire is laid at different distances
from obstacles depending on what the working
area borders. The picture below shows how the
boundary wire should be routed around the
working area and around obstacles.
Boundaries for the working area
If a high obstacle, for example a wall or fence,
borders the working area, the boundary wire should
be laid 35
cm from the obstacle. This will prevent the
Automower from colliding with the obstacle and
reduce body wear.
If the working area borders against a small ditch, for
example, a flower bed or a small elevation, e.g. a low
verge (3
- 5 cm), the boundary wire should be laid
30
cm inside the working area. This prevents the
wheels from driving into the ditch or up onto the
verge.
3012-688
35 cm
3012-382
30 cm
3012-381