Filter
Top Products
10 Automower from
2. Presentation
™
2. Presentation
This chapter contains information you should be aware
of when planning the installation.
An installation of Automower from Husqvarna™
includes four main components:
Automower, an automatic lawn mower that mows the
lawn by moving in essentially an irregular pattern.
The mower is powered by a maintenance-free
battery.
Charging station, where your Automower returns
when the charge level in the battery becomes too low.
The charging station has three functions:
• To send control signals along the boundary wire.
• To send out signals so the Automower finds the
charging station.
• To charge the Automower battery.
Transformer, which is connected between the
charging station and a 230V wall socket. The
transformer is connected to the wall socket via an
integrated power cord and to the charging station via
a
20 m long low voltage cable. The low voltage cable
must not be extended.
Boundary wire, laid in a loop around the Automower’s
working area. The wire is laid around the edges of the
lawn and around objects and plants that the mower
must not run into.
The boundary wire supplied for the installation is
250
m long. If this is not sufficient more wire can be
purchased, with a connector, and spliced onto the
existing wire.
3012-691
3012-509
3012-220
3012-221