Filter
Top Products
6 – English
These symbols are on the machine and in the operator’s manual.
Study them carefully so that you know what they mean.
Read the operator’s manual
Reverse Neutral Fast Slow Engine off Battery Choke Fuel
Oil level Cutting height Backwards Forwards Ignition
Hydrostatic free wheel Use hearing protection Parking brake Brake Warning
Never use the machine if persons, especially
children, or animals, are in the vicinity.
STARTING INSTRUCTION
• READ OPERATOR´S MANUAL.
• CHECK ENGINE OIL LEVEL.
• ENGAGE PARKING BRAKE AND LIFT
CUTTING DECK IN TRANSPORT POSITION.
• IF ENGINE IS COLD USE CHOKE.
• START THE ENGINE.
• RELEASE PARKING BRAKE BEFORE DRIVING.
INSTRUCTIONS DE DEMARRAGE
• LIRE LE GUIDE DE CONDUITE.
• VÉRIFIEZ LE NIVEAU D´HUILE MOTEUR.
• SERREZ LE FREIN DE PARKING ET METTRE LE CARTER
DE COUPE EN POSITION HAUT.
• SI LE MOTEUR EST FROID, UTILISEZ LE STARTER.
• ACTIONNEZ LE DÉMARREUR.
• DESSERREZ LE FREIN DE PARKING
Drive very slowly
without the cutting unit.
N
R
EXPLANATION OF SYMBOLS
Speed limiter pedal forwards
Neutral
Speed limiter pedal reverse
Switch off the engine and take off
the ignition cable before repairs or
maintenance
Never carry passengers on the
machine or equipment.
Warning!
Risk that the
machine can tip over
Never drive across a
slope
Keep hands and feet away from
moving parts.