Filter
Top Products
English – 37
MAINTENANCE
4. Fit the support wheels on either side of the rear
of the cutting unit.
5. Disengage the spring for the drive belt
tensioning wheel.
6. Place a foot on the front edge of the cutting unit
near the wheel and raise the front edge of the
unit to make it easier to remove the lift strut.
WARNING!
Wear protective glasses when
dismantling the cutting unit. The
spring which tensions up the belt
can go off and cause personal
injury.
6017-221
6017-222
8009-122
6017-223
7. Engage the strut in the holder.