Filter
Top Products
English – 31
MAINTENANCE
1
2
3
Fitting the cutting unit
1. Place the Rider on a flat surface and apply the
parking brake. Check that the lever for setting the
cutting height is in the lowest position.
Make sure the support wheels are fitted to the
cutting unit (1).
2. Grasp the handle at the front or hold the frame of
the cutting unit (2) and slide the unit underneath
the rider mower.
3. Insert the bolt and secure it with a locking pin.
6017-159
6017-120
WARNING!
Observe caution to avoid trapping
your hand.
8009-438
4. Press down the frame and insert the pin. Fit the
drive belt around the drive wheels of the cutting
unit.
5. Hook up the height adjustment strut.
6017-160
Make sure that the tongue (3) on the cutting unit
engages correctly.