Filter
Top Products
22 – English
DRIVING
Stopping the engine
Preferably allow the engine to idle for a minute
(always min 15 sec) to obtain normal working
temperature before stopping it, if it has been
working hard.
1. Lift up the cutting unit by pulling the lever back
to the end position.
STOP START
MAX 15
WARNING!
Never drive the machine on
ground with a slope of more than
15°. Mow slopes upwards and
downwards, never across. Avoid
sudden changes in direction.
Release lever
The release control must be pulled out in order for
the Rider to be moved when the engine is shutoff.
2. Pull back the throttle control and turn the ignition
key to the STOP position.
3. When the Rider is at a standstill, press down the
parking brake and push in the locking button.
6017-002
6007-014H
6007-015
6007-217H