Filter
Top Products
English - 53
6. MENU FUNCTIONS
• Alarm (4-1-3)
This function means that the first digit of the PIN
code must be entered within 10 seconds after
the
STOP
-button has been pressed or the
mower has been lifted up for any reason. If the
correct number is not entered after three
attempts, the alarm sounds. The alarm can then
be stopped by entering the complete PIN code.
To:
• Activate: Move the cursor to
Alarm
and press
YES
. Select
ON
to activate and press
YES
.
Then specify for how long the alarm should
sound, by answer the question
Duration of
alarm?.
• Deactivate: Move the cursor to
Alarm
and press
YES
. Select
OFF
to deactivate and press
YES
.
When you select
OFF
, the alarm function is also
deactivated.
• SMS (4-1-4)
The SMS function enables the mower to
communicate with its user. When the mower
needs assistance for any reason, it sends an
SMS message to your mobile phone.
To:
• Set the phone number: Set the marker to
Phone number
and press
YES
. Enter your
mobile phone number including country code
in one sequence (e.g. +46(0)123456789) and
confirm with
YES
.
• Activate/deactivate sending of SMS in
conjunction with a fault message or alarm: Set
the marker to
SMS at fault/alarm
and press
YES
. Then select
YES
to activate or
NO
to
deactivate sending of SMS.
• Activate/deactivate time-controlled sending of
SMS: Set the marker to
Periodical SMS
and
press
YES
.
Select
YES
to activate time-controlled sending
of SMS, confirm with
YES
. Then set how often
the mower should send SMS messages
concerning its status by entering the time
interval in hours (e.g. 4 h to send an SMS once
every four hours).
Select
NO
to deactivate time-controlled sending
of SMS.
IMPORTANT INFORMATION
The alarm can be activated on the mower
using the
Alarm
function. It is recommended
that this function is used.
_ _ _min
4-1-3
ON
OFF
PIN code
Time lock
Alarm
SMS
4-1-4
Phone number
SMS at fault/alarm
Periodical SMS
SIM PIN
SMS test
PIN code
Time lock
Alarm
SMS