Filter
Top Products
17
41462-01 10/14/2005
®
AA
AA
A
TTTT
TTTT
TT
ACHING THE LOWERACHING THE LOWER
ACHING THE LOWERACHING THE LOWER
ACHING THE LOWER
SWITCH HOUSINGSWITCH HOUSING
SWITCH HOUSINGSWITCH HOUSING
SWITCH HOUSING
1. Place the lower switch housing
assembly over the upper switch
housing. Make sure that the two
wires for the optional light kit
with wire nuts firmly attached,
are completely inside the lower
switch housing.
2. Align the side screw holes in the
upper and lower switch hous-
ings. Attach the lower switch
housing to the upper switch
housing with three #6-32 x 3/8"
housing assembly screws. See
Figure 8c.
FigurFigur
FigurFigur
Figur
e 8c - Lower Switch Housinge 8c - Lower Switch Housing
e 8c - Lower Switch Housinge 8c - Lower Switch Housing
e 8c - Lower Switch Housing
InstallationInstallation
InstallationInstallation
Installation
Upper
Switch
Housing
2 Wires for
Optional
Light Kit
Lower
Switch
Housing
Housing
Assembly
Screw
INSTINST
INSTINST
INST
ALLING ALLING
ALLING ALLING
ALLING
ACCESSORACCESSOR
ACCESSORACCESSOR
ACCESSOR
Y LIGHTY LIGHT
Y LIGHTY LIGHT
Y LIGHT
KITSKITS
KITSKITS
KITS
To install an optional light kit, replace
the lower switch housing with the
light kit compatible switch housing.
Follow the instructions included with
the light kit for wiring, mounting and
assembly. After completing installa-
tion refer to the fan instructions for
switch housing reassembly.
The following Hunter Low Profile
type light kit models
ARE NOTARE NOT
ARE NOTARE NOT
ARE NOT com-
patible with this fan.
DO NOTDO NOT
DO NOTDO NOT
DO NOT use
the following models.
22498
22898
22909
26122
26126
26130
27140
27141
27142
27196
28048
29130
26131
26132
26133
26134
26135
26136