Filter
Top Products
35
41457-01 7/2000
®
PROBLEM PROBABLE CAUSE SOLUTION
No functions operate or do not operate
correctly. (With Remote)
1. Main Power not restored.
2. Fan pull chain not set to High.
3. Light pull chain not set to ON.
4. Receiver wiring incorrect.
5. Transmitter and receiver dip
switches do not match.
6. Battery too weak.
1. Replace fuse. Turn ON circuit
breaker. Turn ON wall switch.
2. Turn OFF power at wall switch
or main electric panel. Set fan
to High speed.
3. Set light kit to ON.
4. Verify wiring connections.
5. Set transmitter and receiver to
same dip switch setting.
6. Replace with new battery.
Operates only at close range. (With Re-
mote)
1. Signal blocked from reaching
receiver.
2. Battery too weak.
1. Extend antenna into ceiling box,
or move it for better reception.
2. Replace with new battery.
Inconsistent operation. (With Remote)
1. Signal partially blocked from
reaching receiver.
2. RF interference.
3. Continuing RF interference.
1. Extend antenna into ceiling box,
or move it for better reception.
2. Turn OFF wall switch for 5
seconds, then turn back ON.
3. Change dip switch settings to a
different code in both Transmit-
ter and Receiver.