Filter
Top Products
924916KG251004
OPERATING THE MOWER
1D924P07A
DIFFERENTIAL LOCK
WARNING : PREVENT ACCIDENTS - Do not engage the
differential lock at high speed. The turning circle will increase with
the differential lock engaged.
The differential lock operates in both ‘forwards’ and ‘reverse’ and can be
engaged whilst the mower is travelling slowly. Engage the
differential lock to prevent excessive wheel spin when the drive wheels
lose traction. Engine power demand increases when the differential lock
is engaged. Prevent excessive power requirements by operating with
differential lock at SLOW speed.
Engaging differential lock: Depress the differential lock pedal.
Disengaging differential lock: Release the differential lock pedal.
TRANSPORT LATCHES
WARNING : PREVENT ACCIDENTS - ALWAYS raise the
cutterheads to the transport position and secure with the transport
latches and safety locks when travelling between work areas.
Front cutterhead transport latches:
Centre cutterhead transport latch:
1
2
1. Transport latch.
2. Safety lock.
1.28
1.28
SPEED CONTROL PEDAL
The speed control pedal can be adjusted to provide two speed ranges.
Securing the speed control cable through hole ‘A’will provide 0-22 km/hr
(0-14 mph) forward and 0-11 km/hr (0-7 mph) reverse. Securing the cable
through hole ‘B’ will provide 0-19 km/hr (0-12 mph) forward and
0-8 km/hr (0-5 mph) reverse.
WARNING: PREVENTACCIDENTS - Ensure that the control cable
is securely fastened to the speed control pedal. Ensure that both the
cable and pedal articulate freely through their full range of travel
and that the mechanism freely returns to neutral when released.
WARNING: PREVENTACCIDENTS - Ensure that the control cable
is correctly routed underneath the operator platform such that it is
clear of any obstructions and impediments to its operation.
A
B
3D924S03A
Section through
operator platform
Speed control cable
Speed
control pedal
1
1
2
2