Filter
Top Products
924916KG251004
INTRODUCTION
Fixed
Heads
Cutterhead
Number of bladesCylinder diameter
MK3 Cutterhead
200mm
4, 6, 8, 10.
✔
✔
Floating Heads with smooth
or grooved front rollers
254mm
4, 6
✔
1.17
1.17
INTRODUCTION
The Hayter LT324 Triple Turf Mower is a diesel engine powered self propelled machine with hydraulic
systems for ground drive, cutterhead drives and steering. The machine operates in two wheel drive with
automatic four wheel drive on demand. A differential lock function may be selected. The transmission
system is converted automatically to engage drive to all 4 wheels when the machine speed decreases as
a result of front wheel traction slip. 2WD is automatically re-engaged when traction slip is reduced.
The Hayter LT324 Triple Turf Mower is a precision built machine designed solely for cutting grass and
similar low lying ground vegetation within the limitations stated in this manual. Use in any other way
is considered as contrary to the intended use. Compliance with and strict adherence to the conditions
of operation, service and repair as specified in this Operators Manual also constitute essential elements
of the intended use. The way in which this machine is operated and maintained will have a profound
effect on its performance and reliability.
This manual contains advice on the Hayter LT324 Triple Turf Mower which should be operated, serviced
and repaired only by persons who are familiar with its particular characteristics and who are acquainted
with the relevant safety procedures.
The safety precautions listed herein and all other generally recognised regulations on safety and all road
traffic regulations must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve Hayter Limited of liability for any
resulting damage or injury.
In the pursuit of continuous product development Hayter Limited reserve the right to alter specifications
without notice.
Cutterhead Variants: The Hayter LT324 can be fitted with a range of cutterhead configurations and
optional extras:
Optional Extras:
Beacon Kit - Amber flashing warning light.
Lighting Kit - Complies with EC traffic regulations.
R.O.P.S ( Roll Over Protective Structure ) 2 post design.
Cab R.O.P.S. - Full weather protection and roll - over protection.
A R.O.P.S. must be fitted to ensure operator safety when working on slopes in excess of 19
degrees, refer - SAFETY PRECAUTIONS.
When fitting optional extra kits to the mower be sure to fix the serial number decal supplied with the
kit to the rear bulkhead underneath the engine cover. This will help the Hayter spare parts department
to supply the correct spare parts throughout the service life of the mower.
Left and Right: Throughout this manual the terms 'Left' and 'Right' refer to the machine when looking
in the direction of forward travel.