Filter
Top Products
20
STEERING SULKY RIDING SULKY
Figure 35 Figure 37
Figure 36 Figure 38
MOUNTING:
The sulky chassis weldment attaches to each side of the
rear hitch of the tractor. It is secured in place by
installing the hitch bolt through the sulky chassis
weldment and the hitch of the tractor. Place a
flatwasher on the hitch bolt, and secure in place using
a lockwasher and nut. Repeat for the other side.
OPERATION:
USE OF DUAL WHEELS ON THE TRACTOR IS
REQUIRED.
The Steering sulky allows the tractor-sulky combination to
be operated as a single unit.
The Tractor will turn in the direction the steering wheel is
turned. Care should be used when operating the unit
on slopes.
SAFETY FIRST:
1. Operate unit slowly and in an open area until you
are familiar with the operation and action of this type
of steering.
2. Always reduce speed on sharp turns.
3. Always keep a firm grip on the steering wheel.
LUBRICATION:
Upon Assembly and after every 8 use hours grease all
fittings with general purpose grease. l here are 6
fittings.
Wheels - 2
Spindles - 2
Cross Bar - 1
Steering Column - 1
MOUNTING:
The Riding Sulky attaches to the tractor using the Trailing
Hitch Kit.
LUBRICATION:
Upon Assembly and every 8 hours, grease the wheels
with general purpose grease.
OPERATION:
The Riding Sulky allows the tractor operator to ride rather
than walk.
SAFETY FIRST:
1. For slopes, terraces, and uneven terrain, disconnect
the sulky.
2. Use extreme care when turning or backing up.
3. Always reduce speed in sharp turns.
4. Always keep a firm grip on handle bars.